How to Remove Stopper From Bathroom Sink

Is the stopper jammed in your bathroom sink? There are a number of methods to fix the solution, depending on your technical skills and how firmly it’s wedged.

You can use a piece of gum, or if it’s metal, a magnet, and, if that doesn’t work, you can go underneath the sink and remove the stopper by removing the pipe and pushing on it with a long tool like a skewer, flat-head screwdriver, or coat hanger.

Assessing the Situation and Your Capabilities

Take a look at and underneath the bathroom sink before getting frustrated and cursing the moon and plumbers that built it.

If you’re not sure what the problem is, determine whether you are willing and able to perform the required repair.

Remove a Broken Stopper with These Techniques

The stopper may also get caught in the bathroom sink, which happens sometimes. If this has occurred to you, there are a few methods you can try to remove it.

Use Your Hands

If you have the fingernails for it, you can wedge it into the tiny gap between the stopper and drain to pull the stopper up and out of the drain.

Sticky hands, also known as Aka gum.

If the hook just pops out of position, causing the stopper to drop down, use a piece of gum to bring the stopper back up. You’ll still need to put the stopper back in, but at least your bathroom sink will now drain.

Use a Magnet

If you have a stopper with a metal top, it might be painted plastic. Try using a magnet to pull the stopper back up if you’re lucky enough to have one. This method is similar to the previous one in that it only works if the stopper has fallen out of place.

Normal Method to Remove a Stopper

If the stopper in the bathroom sink is clogged with debris owing to a blocked drain, you’ll just need to take it out using your normal method.

Get Hands-on

If the stopper has become trapped for any other reason, you’ll need to remove the drain pipe and free it.

Steps:

• To unclog a drain, gather the following items: a pair of pliers or channel locks, a brush, a bucket, and a snaking tool.
• Fill the bucket halfway with water and lower it into the pipe.
• Remove the horizontal rod from the plunger and unclip the vertical strap attachment clip.
• Remove the stopper and let it fall from your lips in revulsion and dread.
• Clean the stopper well with soap and water, vinegar, or whatever you choose. When it’s clean, set it aside.
• Remove the stopper from the drain with your poking tool (flat-head screwdriver, etc.) up

Reinsert the stopper into the drain.

Slide the horizontal rod into the end of the sink stopper, then attach the horizontal rod to the vertical strap using the clip.

Remove the plug and plunger from one end of the drain pipe, then insert them into the other. Carefully tighten it using a wrench so that no water can escape. If everything is in order, you may now remove the stopper and test it to ensure that it seals the drain effectively.

If All Else Fails

If you’ve investigated all possibilities and still haven’t found a solution, don’t worry—help could be on the way.

Call a Plumber

If you still can’t figure out how to remove the stopper from the bathroom sink, call a plumber. After all, there’s nothing wrong with asking for assistance.

Even if it isn’t the path most of us would take, you may consider it a victory by proxy.

Recommendations

If you’re stumped as to how to address the problem, start with the most simple solution and work your way up.

Another good idea is to look for a YouTube video that discusses the same subject. Keep in mind to watch the film from beginning to end and examine the comments for truthfulness. Although it isn’t common, individuals do occasionally post false instructions that may cause more damage than benefit.

Nothing is more inconvenient than finding your bathroom sink stopper clogged. Fortunately, the techniques outlined below are a fantastic method to address the issue and demonstrate your expertise. If you’re genuinely perplexed and at your wits’ end, consider asking a technical expert or friend for help.