How to get rid of Ring in Toilet Bowl

Getting rid of the toilet ring is so hard. Scrubbing and scrubbing but you just can’t get it off your hands. It feels like you’re never going to finish this job if you have that nasty stain on your hands from scrubbing for hours. 

Luckily, there are some methods that can help with getting rid of that pesky ring. We’ve found a few different ways to make cleaning easier and more effective! Check out our guide below to learn how to get rid of toilet rings in no time at all!

Using Toilet Bowl Cleaner:

A toilet bowl is a dirty place, and it’s hard to get the stains out. You can try scrubbing at the ring with harsh chemicals, but that doesn’t always work. Plus you’ll have to deal with the smell of bleach or ammonia for days! 

Instead of trying all those other methods, use a toilet bowl cleaner instead. It will remove your ring in no time flat without any effort on your part! Just spray it on and let sit overnight. In the morning, flush away everything else too! Your bathroom will be sparkling clean in no time flat.

Using Baking Soda with Vinegar:

I have tried everything to get rid of the toilet ring, but nothing works! It’s frustrating when you spend hours cleaning your bathroom only for it to look like a mess again in just a few days. 

You can try this simple recipe that will remove the stain and smell from your toilet bowl naturally. Just mix 1/2 cup of baking soda with 2 cups of white vinegar in a large bowl. Then place it outside (preferably in direct sunlight) for at least 8 hours, but ideally 12 hours or more.

After that, all you need is some elbow grease and warm water to scrub away the hardened residue left by the mixture. The result is an odorless fresh looking toilet bowl without any stains!

Using an Old Toothbrush or Scrub Brush:

The toilet ring is a pesky problem that can be difficult to remove. It’s unsightly, especially if you have guests coming over.

There are several ways to get rid of the rings, but we recommend using an old toothbrush or scrub brush to remove any unwanted residue. For tough stains on the inside of your toilet bowl, try this trick from our friends at Reader’s Digest…Sprinkle some baking soda into the water and let it sit overnight; then flush as usual in the morning.

Using Pumice Stone:

Toilet rings are ugly, and they can be hard to get rid of. If you’ve tried everything from bleach to toilet bowl cleaner with no results, it’s time to try a new approach. 

Use pumice stone! It is the most effective way to remove that nasty ring in your toilet bowl. All you have to do is put it on the rim and rub it in a circular motion until the ring disappears. You’ll love how easy this method is!

Using Magic Eraser:

The ring around your toilet is hard to remove, but not impossible. There are a few ways you can get rid of it using household items that you already have at home. Here’s how to do it without paying for expensive cleaners or scrubbers.

All you need is one magic eraser, some baking soda, vinegar, lemon juice, and an old toothbrush (or a new one if you don’t mind throwing away after). You will also need some paper towels or rags as well as gloves because this process involves getting down on your hands and knees cleaning the floor with vinegar. This method works best on porcelain toilets so maybe consider grabbing a pair of rubber gloves before starting this project if yours is made out of another material like plastic or metal.

Conclusion:

Toilet rings are gross and we’ve all had to deal with them at some point or another. If you want a way to get rid of toilet rings for good, try using these tips from professionals. Now that you know how it works, give these methods a shot next time your bathroom is in need of a deep clean!

Leave a Reply

Your email address will not be published. Required fields are marked *

Available for Amazon Prime